12832 LCD display high dense liquid crystal display
Our advantage and service
15 year's design,manufacture and sales experience
300+ models available,custom orders welcome
exporting to 100+ countries
Free 1-year maintance
| Item name | OKM12832-21C | Format | 12832 Dots 2 |
| V DD | 3.3V | V OP | 7.5V |
| Driving scheme | 1/33 Duty cycle, 1/6 Bias | Viewing direction | 12 o’clock |
FAQ
1.How does OK guarantee the quality?
Answer: OK has passed ISO9001:2008 certification. ISO principle is carried out in daily activities. The quality is strictly controlled in designing, material incoming, production process, equipment, management and checking and the rejects are not allowed to flow at any circumstances.
OK has thousands of customers, in many cases, one product is being used by many customers. If one product is used by many factories, the quality is believable because most of the problems were solved already.
The OK is following the quality standards from automotive industry. Special attention is paid to the capacity of anti-high-temperature, anti-shock and aftersales reliability.
We don’t fear the rejects on the production line, we badly fear the rejects at the final consumer’s hand. Solving such kind of rejects are most costly. Startek is always pursuing 0 aftersales reject, so we adopted the strictest quality standards.
Our factory
Static Electricity Precautions:
1. CMOS-LSI is used for the module circuit; therefore operators should be grounded whenever
he/she comes into contact with the module.
2. Do not touch any of the conductive parts such as the LSI pads; the copper leads on the PCB
and the interface terminals with any parts of the human body.
3. Do not touch the connection terminals of the display with bare hand; it will cause
disconnection or defective insulation of terminals.
4. The modules should be kept in anti-static bags or other containers resistant to static for
storage.
5. Only properly grounded soldering irons should be used.
6. If an electric screwdriver is used, it should be grounded and shielded to prevent sparks.
7. The normal static prevention measures should be observed for work clothes and working
benches.
8. Since dry air is inductive to static, a relative humidity of 50-60% is recommended.
Product Tags:
|
|
12832 Graphic LCD Display Module High Dense Liquid Crystal Display Images
|
